Author Archives: Blythe

About Blythe

I live in rural Tasmania where the only clothes I need are farm-style workwear and a pair of Blundstone boots. I cannot justify sewing wool dress trousers, white silk shirts , linen blazers, retro cotton dresses; these clothes are not needed for my lifestyle. But I plan to sew them anyway...

It’s Easy Being Green with Vogue 8379

It’s the dress every other sewing enthusiast has already made:  Vogue 8379 wrap front dress.  I had to buy the pattern after all the rave reviews, especially The Selfish Seamstress’, but it took ages to actually make one.  Again, I wasn’t sure this would suit me.  The people I think especially rock this dress have fuller figures than mine.

Vogue 8379

Vogue 8379

It is a VERY comfortable dress.

* as mentioned, this dress is SUPER comfortable
* hardly any pattern modifications required
* the wind can blow but the skirt wraps enough that modesty is preserved

*  while sewing it, I loved the soft pleats in the bodice which I thought added interest. Now I think they just add weird bunching in places I don’t want bunching. Boo.
* the front hemline drops a little at the tie, and that really bugs me. You can see it in the above picture. I am SO CAREFUL to tie the wrap well, but the skirt still sags…
* I don’t absolutely love how the tie crosses over itself at the back. I probably prefer a single layer of tie.


Sewing Modifications:
* I took 20 INCHES out of the fullness of the skirt, and I don’t think it is lacking for that. It makes the dress a lot cheaper.

* I added 1.5cm in length to the bodice length. Other reviewers mentioned it being a bit short in the bodice. Mine sits perfectly at my waist.
* I shortened the sleeves and left the sleeve band off. I had planned to sew it, but there was just SO MUCH GREEN!

Now I have a confession. One reason it has taken SO LONG for me to do this post is because I had some photo issues.  Here is one of the original photos.  I was wearing the dress to a school band concert.  I DO like the dress with boots for me.
Check OUT the funky shadow behind me on the wall. It’s like I am only masquerading as a woman but I am really a gargoyle!



I like it; I do. But I am not sold on the pleats. I might try another version without them.

Trailblazering with Burda 8201

OK.  Maybe I am not exactly trailblazing as far as sewing goes, but my first BLAZER is a huge milestone for me, nonetheless.



I love blazers, jackets, and coats. I have a LOT of patterns for blazers, jackets, and coats. Some part of me obviously feels as though the POSSIBILITY of a new blazer, jacket, or coat is as good as having the actual thing.  I have procrastinated when it has come to making one, though, always feeling my sewing/fitting skills were inadequate for projects this complex.

And this project showed me that, yes, they are inadequate. Despite that, I have something wearable from the experience.

Matching it with my McCall's maxi dress, hurray!

Matching it with my McCall’s maxi dress, hurray!

I wanted a simple jacket for my first attempt, preferably unlined to keep the number of challenges to a minimum. I considered By Hand London’s Victoria Blazer which is so popular of late, but to be honest, as fresh and hip and NOW as it probably is, I am not keen on all the ease in the pattern. I saw Amy’s version of Burda 8201 and thought, YES! I want to do a cool floral blazer, too! But first, a linen blazer to wear with shorts and dresses for the upcoming summer.

I did Craftsy’s Jacket Fitting Techniques class in preparation for sewing a jacket. It was useful in giving me confidence when it comes to pinching out seams, but my biggest bugbear with it is that Pam Howard creates extra seams to allow for better fitting. What if the fabric you are using is best sewn with as FEW SEAMS AS POSSIBLE?? Such as a print? So I ignored that advice and sewed Burda 8201 as is.

I made a small adjustment to the paper pattern (shortened the bodice by a couple of centimetres so that the waist would sit where it should) and then made a muslin out of horribly stiff calico. I guess the untweaked muslin was horrendous, because I don’t have any photos of it. I pinched and pinned until I liked the fit and re-sewed.


Here is what my adjustments looked like when I took the muslin apart. The black dotten lines are the seamlines and the red dotted lines are the new seam allowances:
As you can see, it is much more shaped along the seams than the original.

I had a ‘bubble’ of fabric along my upper back which couldn’t be taken in along the centre back seam. Here I used a tip I DID get from Pam Howard’s online class and removed fabric from the back like this:

This pattern does suggest using shoulder pads. I have never sewn anything requiring shoulder pads before (Dynasty, anyone?), and the shoulder seams of the muslin really stumped me. They were sitting high off my body and also felt as though they were too far back, but I didn’t want to adjust it in case that is how patterns using shoulder pads are SUPPOSED to look…I had visions, though…

using dildos for shoulder pads.

using dildos for shoulder pads.

As it turned out, NO, the shoulder seams should not have been so high or far back for the look I wanted. Shoulder pads were never going to fix the uncomfortable feeling of my body fighting against misplaced seams. I had already cut the linen dress fabric, though, and I ended up having to unpick those shoulder seams and use every last millimetre of the back piece seam allowance to bring the seam forward so that it would sit right.

The sleeves were straightforward, though I eased a much larger area of the sleeve cap so that I didn’t get any puckers.

No lining for this pattern, so I used bias tape to cover the seams:


Just OK.  I overlocked the seams before realising they would be hidden within the bias tape, and the overlocking is sometimes visible, which is a bit messy.

ALSO, even though I was DILIGENT with doing all my fitting with the blazer pinned closed, I didn’t take into account the size of the buttons I would be using, and AFTER I sewed three lovely buttonholes, I realised the big buttons pull the jacket tighter than the pins did.  Too tight.  So I guess I’ll unpick the buttonholes and either reset them or I may end up using hooks and eyes.



Pattern Burda 8201-  I did a lot of tweaking with this pattern, so no ‘sewing straight from the envelope’, but I want a shawl-collar jacket pattern, and I really like the look of this one.  There are diamond darts in the front pieces, and I like that they aren’t princess seams which would make fabric placement trickier with prints.  The instructions are good and straightforward.

the sewing experience- Not 100% fun, I have to say.  I made a muslin, a linen jacket, and I still have’t ironed the bugs out of the fitting.  I quite enjoyed all the techniques, but my enjoyment is VERY CLOSELY linked to how the garment looks and feels at the end.  Work still to do, here.

the finished jacket- I love the colour, I love the simple style, and I love the versatility of a linen jacket.  It is tighter across the shoulders than I would like, and there is that issue with the buttons, but I am really happy with the finished product and I have worn it quite a few times.

I do recommend this pattern and I will be sewing with it again.  After all that work, I’d be crazy not to!


Dressing for Maxi-mum Effect- Mc Call’s 6744

Sorry for the long delay in posts.  I went on holiday, and took some new holiday clothes with me!  Check out McCall’s 6744.

McCalls 6744

This is another maxi dress pattern which I purchased after loving other people’s versions.  MzChoize, for one.  I LOVELOVELOVE the fabric she used, and she looks fabulous in her version.  And, of course, Mimi G.  Again, I wasn’t sure this dress would suit a less-curvy body like mine, but I love it, I love wearing it, and I feel good in it.  What an excellent pattern, where it can suit someone as lusciously hourglass as MzChoize as well as less shapely types, like myself.

might want to give serious thought to your choice of underwear!

Might want to give serious thought to your choice of underwear!

Something I thought I’d better mention.  The leg slit for this pattern is high. It really is a wonderful beach-style dress, where the wind can blow the skirt open and reveal a tantalizing glimpse of your swimming costume.  If you plan to wear this as casualwear, I would probably suggest tacking the skirt somehow to limit the reveal.  Or, you can do as I do and just wear your sexiest underwear ho ho ho.

McCalls 6744 comes with three variations.  I bought the pattern for Version C as shown on the pattern cover which has the elasticised shoulders.  I love this feature, and I love having a summer dress which can protect my shoulders from sunburn!  That said, I will very likely sew one of the other sleeveless versions in the future, too. And I would really like to try a woven version, too…

ITY jersey knit

ITY jersey knit

I used another oriental ITY jersey knit for this maxi, but this time was much more enjoyable. And I also love how the dress feels despite being polyester. Must be all the ventilation from that slit in the skirt.

I sewed an XS size, even though I should have sewn a Small, according to my measurements. Other people mentioned in their reviews that the sizing runs on the large size. I certainly wouldn’t have wanted this dress to be bigger.

And just to finish, here is a photo of my dog. Other people’s sewing blogs seem to be filled with photos of their cats, but I am definitely a dog person, and here is my beautiful boy, wanting to get in on the photo shoot action.

So, there you have it: McCalls 6744 (on special at the time of writing this!!). Another winner.

Tackling Plaid

Well, I did it. I bit the bullet and made plaid pants.
I must confess, I sewed plaid once before, a nice Burda dress with lots of seams in the bodice. Maybe I am stupid, but I didn’t realise plaid needed to be matched, and I wore that dress with all the seams mismatched. Nice.
A couple of years on, with my new focus on quality sewing, I sat down, read some great posts like Sewaholic’s Matching Plaids: A Step By Step Guide and Amy Alan’s Cutting Out Plaid, and here is the result.

Thurlow Trousers in Plaid

Thurlow Trousers in Plaid

This is Sewaholic’s wonderful Thurlow Trousers pattern again.  Interestingly, they are a bit looser than my first Thurlows, but I don’t mind that.  This is a polyester suiting fabric, and it behaves a bit differently to the gabardine I used for my first pair.

As per Sewaholic’s and Amy’s instructions, I spent a LOT of time matching the lines before cutting the pant pieces.  I cut everything separately- no cutting on folded fabric for this.  Once I had cut out one piece, I reversed it and placed it on the fabric in EXACTLY the spot which matched the plaid lines.  Then I pinned through the top pattern piece and checked that the pins were coming through the same place in the underneath fabric.  This was very time-consuming.  I didn’t mind too much.  Being a first time, it was quite interesting.

PINNING the fabric in preparation for sewing was also much fiddlier than with plain fabric.  I pinned every line, again checking that the pins entered and exited the same place on the top pattern piece and the underneath pattern piece.

pinning pieces before sewing

pinning pieces before sewing

Even with this careful preparation, the lines did not always sew together perfectly, and I was amazed at how many small adjustments I had to make which I would NEVER make for plain fabric. Does this mean that when I sew plain fabric, the grain shifts but I never realise? Hmm…

All in all, I’m pretty pleased with the matching.

DSC_5953 DSC_5954
The stripes match over the pockets perfectly despite what the photos show. The plaid matches up the waistband at the front, but because the waistband curves, it stops matching towards the back.  The side seams are pretty good, too. Not perfect, but there was NO WAY I was going to unpick them and re-attempt the seams when they were so close.

side seams

side seams

Some more pics.  I rushed these photos a bit, and I also did not pose in the shoes that I hemmed these pants for (too lazy to go downstairs and get them), so the pants actually hang better than the photos would suggest.

I was really excited that these pants would be able to be dressed up or down…I am wearing an unblogged Jalie Scarf Collar Knit Top which I sewed especially for these pants. The red top is a purchased T-shirt.
I purposely left off the belt loops from these pants so that I could wear tops over the waistband without bulges. I prefer the look of the top pulled down over the top of the pants; for some reason, the waist looks a bit high to me with the tucked-in shirt, and I don’t feel that way with my first Thurlows. Weird. I guess belt loops and a belt breaks it up some.
I also left off the welt pockets. I didn’t think they would show up too well, so I couldn’t be bothered spending the time it would have taken to match them.





I think it works both ways.


All in all, I’m really, really happy with these pants. They are comfortable and I think I will get a lot of wear out of them. I think that they fit into my ‘good quality clothes’ wardrobe while also being a bit funky and cool. Love.

Stepping Into Summer with McCalls 6700

September in Tasmania can just as easily be snowing at 400metre altitude as it can be a pleasantly sunny 20degree C day, but I just couldn’t wait any longer.  I wanted a nice summer dress, and I wanted to be sewing something BRIGHT and happy.  I am basically starting my fashion wardrobe from scratch, and what it really needs is STAPLES in neutral colours, but I have decided that my SEWING needs are different to my WARDROBE needs.  I’m going to intersperse the sensible projects with the frivolous projects, little lollies for my sewing soul.  Enter McCalls 6700 maxi dress in a pink printed polyester knit.


I was interested to see if this style would suit me, being of a more athletic build (from this point on, athletic means no boobs).  It definitely looks great on voluptuous women, but I thought the V-neckline could make this pattern unflattering for me.  I’m pretty happy with it, though.

OK, first off, the fabric- this is a polyester knit.  Yuck.  It was horrible to sew, and being the sewing snob that I am becoming, I really don’t like that this is a synthetic fabric.  But I bought it because I really wanted a fabric with a large, irregular print, and this was the best my local fabric shop had to offer.  I would have loved to have made something like this version from Sew Wil.  I love the size of the printed flowers on her fabric.  Or Kim’s from KimSewSilly., with the print running assymetrically on the dress.

This fabric is 2 way stretch (also called 4 way for you northern hemisphere folks), so the most stretch ran with the stripes going vertically, but I decided to cut the skirt with the lines going horizontally because I thought it worked better on my slendericious frame. (I am trying to coin a term for people with slimmer physiques  which has the same positive feel as bootylicious.  Something for people with no junk in their trunks.  Any suggestions? ).

I made an effort to match the stripes at the seams.  Some of the stripes curve, and I didn’t have enough fabric to match the curves, so I just matched as much as I could.

side seams

matching at the side seams

the fabric isn't stable enough for the lines along the neckline to sit properly.

the fabric isn’t stable enough for the lines along the neckline to sit properly.

I cut the bodice with the stripes going vertically; I thought the greater stretch might be wise for the tighter bodice.   I also thought the vertical lines could frame the V neckline.  They do, but the knit kind of rolls so that it isn’t very noticeable.


  1. TIGHT ARMSCYES- No one who reviewed McCalls 6700 mentioned this, but the armscyes (armholes) were AWFULLY HIGH for me.  I am guessing this has to do with how developed my lats are (the muscle along the side of the ribs which gives men their V-shape), and this was a good lesson that I must sew for my shape, not my size.  I like freedom of movement, and I don’t think polyester and armpits makes for a good combo, so I CUT those babies down.  Basically, I unpicked the seamline until the fit was comfortable, then I folded the new seam allowances back to make V shaped armholes.
Check out those armscyes!

Check out those armscyes.  Much more comfortable.

2. ‘Raised waistline’ (as per the pattern description) always gives me cause for concern.  I understand empire lines, and I get dropped waistlines, but a raised waistline is a mystery to me.  Maybe it suits women with long torsos?  To me, raised waistlines always feel like I’m playing dress-ups in something sizes too small.  OR, even worse, it can look like an empire line for someone with very droopy boobs.  Maybe it suits women with HIGHER WAISTS?? Hmm…

Anyway, I went along with the style, and I can safely be telling y’all that I will never be wearing this dress without a belt.   But seeing as the pattern includes directions for a fabric belt, I guess it isn’t meant to be worn without one anyway. And come to think of it, kimonos are worn with the obi quite high, so maybe that is the style inspiration.

I went with  Mimi G‘s styling and skipped the fabric belt for a store-bought belt.   (Mimi G rocks.  Other sewing folk with a similar body type copy her style with great results.  She is one of my sewing inspirations, and If I had a similar body, I’d be copying every outfit she creates.).


  1. The skirt allows for complete ease of movement; no need for geisha steps in this dress (although I suppose the geisha steps could go with the raised waistline…).
  2. The pattern only has 4 pieces if you skip the necktie (which I and many others did.  The dress stays put fine without it).  This is a great quick-fix project.
  3. The fabulous Goodbye Valentino made her McCalls 6700 with a woven fabric.  When I figure out the armscye issue, I will use this pattern for WOVEN fabrics as well as knits, just like Goodbye Valentino.  That makes the pattern twice as valuable, in my opinion.


McCalls 6700 is a great quick-fix, and you get a lot of bang for your buck for the time investment.  I think it works for a range of body types, and it is very comfortable to wear.  I’ve decided that I love maxi dresses and want them to be a summer wardrobe staple.  Hurray!  My ‘lolly’ project has turned into a ‘meat & 3 veg’.

from behind

The Perfect T-Shirt Pattern

Jalie 2805 and Kitschy Koo’s Trifecta Top: A Comparison

Is it just me, or are there NO KNIT TOP PATTERNS WITH NEGATIVE EASE on the market??

And I’m not talking  classy “fitted” T-shirt patterns, I’m talkin’ skin-tight, baby.

I understand how the majority of home sewers could probably prefer a shirt which doesn’t cling to the belly like cling wrap.  They may be stoked to know that a pattern “falls from the bust”,  has “gentle side shaping” and that it “skims the hips”.  Not me.

Aside from style choice, I have another reason for wanting to sew tight-fitting T-shirts.  My day to day wardrobe almost all year round on our temperate Tasmanian property is a merino thermal  top with stretch cotton cargo pants.  Thermal tops need to sit against the skin to do their job.  I love merino because it is warm but breathable, so it’s still comfortable if the weather suddenly warms up.   It also doesn’t smell; in our household, tank water is precious, and being able to wear clothes for more than one day means less water used for washing.

The only problem with merino tops is the price.  One top sets me back AU$120.00.  Not cheap.  So I decided to experiment with sewing thermal tops.  And the search for a suitable pattern began.

I spent a lot of late-night googling sessions trying different search-terms to find the sewing pattern I wanted.  Long story short, I didn’t find it, so I resigned myself to having to modify an existing pattern.

Kitschy Koo’s Trifecta Top VS Jalie 2805

I really wanted a top with raglan sleeves (mmmm, comfy!) which led me to try Kitschy Koo’s Trifecta Top.  I also had Jalie 2805 in my stash, so I decided to make them both and do a comparison.

What do you think?

Trifecta Top

Trifecta Top

Jalie 2805

Jalie 2805











I sewed them both from the same green merino fabric because it is all I had to give the best comparison of the two patterns.

Here are the basic differences: Trifecta Top has a lower scoop neck (even though I used the highest scoop of their three necklines) and it has raglan sleeves.  I used the “jewel” neck of the Jalie pattern, and it has set-in sleeves.

Trifecta Raglan sleeves

Trifecta Raglan sleeves

Augst 2014_5747

Jalie 2805 set-in sleeves

Check out the modifications I needed to make to the side seams to get the tight fit I wanted:

Side seam modification

Side seam modification

That is roughly 2″ each side at the waist on the paper pattern!!  That’s a LOT of pinching in to get a fitted waist.  I had to do this for both the Trifecta and for Jalie 2805.

The Verdict

  • Instructions- Both have excellent instructions.
  • Pattern-  I think both patterns are very well drafted.
  • Style- I needed to make the same side seam modifications for both patterns to get the close fit I wanted.  I think the Trifecta is very flattering, with its lower neckline.  But this is meant to be a thermal top, and I felt like I needed to put on another top or wear a scarf in cooler weather.  The Jalie’s jewel neckline is perfect for a thermal top.
  • Fabric Used-  Here is the REAL clincher.  Because of the raglan sleeves, I needed 1.4 metres of fabric for the Trifecta Top.  With Jalie 2805, I only needed 0.8 metres.

0.8 METRES???  That’s amazing!!!

And with merino wool fabric being roughly $25.00/metre plus postage, this is an absolute no-brainer.  It cost me less about $25 to make the top (dividing postage up with other fabric I ordered from the same place): $25 compared with $120 for a store-bought one.

Congratulations, Jalie 2805, you are the WINNER!

Don’t get me wrong.  I think the Trifecta is great, and it has lots of cute styling options with the armbands, hembands, and little pockets.  I look forward to trying them when I come across some good-priced knit fabric.  I am actually happy I own both patterns.  They both have different neckline and sleeves to each other, so they are different enough that I can justify both in my stash.

But for merino thermal tops, Jalie 2805 is it.


Archer Shirt, though no archery for me yet.

My first ever button-up shirt!  A relatively pain-free experience with Grainline’s wonderful Archer Button Up Shirt.

Archer Button Up Shirt in cream viscose.

Archer Button Up Shirt in cream viscose.

Bit stupid of me to photograph a white shirt against a white background.  Sorry about that.

I wanted to sew something that would go with my grey Thurlow trousers, and I thought the Archer Button Up Shirt would be perfect.  My plan is to sew a wardrobe of clothes which make mix and matching possible if not easy, so I knew I needed a dress shirt.  Would you believe I don’t actually own one?  At all?  Obviously, this needed to be rectified.

I once tried to sew a button up shirt (which doesn’t count as being my first time since I never completed it) which was some kind of stiff cotton. Don’t-ask-me-to-bend-my-arms stiff.  I decided to be extra cautious and make a drapey Archer, so I decided to try viscose.  Viscose is also supposed to be less wrinkly, though I don’t think anyone has told my Archer shirt.  Still wrinkly.

Archer with French Seams and Hand-Stitched Collar

Archer w/ French Seams & Hand-Stitched Collar

There were a lot of firsts with this project, too, and I took my time with it.  I decided to sew French seams, both to learn the technique and because I thought the visose might be a little transparent.  It isn’t, and the seams aren’t visible through the shirt, but I’m glad I sewed the French seams.  The places I shop don’t have clothes with French seams.

I cut a size 2, since my measurements are EXACTLY the size 2 measurements.  Sadly, the shirt is too tight for me across my upper back.  No archery for me in this top.  It’s wearable, but I like to be able to move in the clothes I wear, which is why I like knits so much, and while I don’t expect to feel as free in woven fabrics, this shirt is definitely in the going-to-need-to-sew-another-one-to-replace-this-one camp.  I already have the viscose purchased.

Andrea’s Archer shirt hangs off her shoulders a bit (I love dropped shoulders), so I thought mine would, but you can see they certainly don’t on me.  Must be my manly shoulders.  I actually spent a couple of hours SEARCHING for a dress shirt pattern with dropped shoulders, but I could only find some 80s monstrosity.  And lots of websites telling me how hideous dropped shoulders are. And I thought they were sexy >sigh<.  Kind of casual I’m-wearing-my-man’s-shirt-with-nothing-else-but-undies vibe.  But style sites tell me I am wrong.  I am sure these anti-dropped-shoulder posts were written by women with sloping shoulders.

definitely not a dropped shoulder

definitely not a dropped shoulder

The length of the shirt is a bit short for my liking.  When I raise my arms, I like my shirt to stay tucked in.  Of course, I could remedy this by sewing high-waisted pants to wear with this Archer, but I fear this:

mom jeans

I’d rather just wear longer shirts.  Too late, I notice that Andrea added 3 inches to the length.  I will definitely be doing that on my next Archer.

I like my collars a bit larger than the one in this pattern, so next time, I will try to replace the collar piece with something from another pattern.  Also, I used a very drapey interfacing on the collar, and it really needed more structure.

I wanted a crisp collar peeking out the top of my jumper.  Someone give that collar some viagra, stat!

I wanted a crisp collar peeking out the top of my jumper. Someone give that collar some viagra, stat!

I used Jen’s Archer Sewalong Tutorial.  I expected to just be able to go by the sewalong instructions, but I actually found that I needed BOTH the pattern instructions AND the tutorial at times.

I love this pattern.  For my ABSOLUTE WARDROBE BASICS, I want a drapey white/cream top which FITS as well as a nice, crisp cotton shirting Archer.  And then I will look at the ‘extras’.  Gingham.  Plaid, maybe.   White collarless and sleeveless.  And so on.

I do still want a fitted dress shirt, but this is definitely going to be my TNT dress shirt pattern.  Yay, Archer!

Augst 2014_5731


My VERY FIRST POST!! Sewaholic’s Thurlow Trousers


Sewaholic’s amazingly fabulous Thurlow trousers pattern…what a truly wonderful pattern to start my very first blog post!

The Thurlows are described as being a pants pattern for women with curvier hips and fuller thighs, the classic pear-shaped figure.  I have to admit, I don’t think I fall into this category.    Measurements for the pear-shaped woman always show the hips being larger in proportion to the waist than mine, and the Thurlow pattern is no exception.  That said, this pattern received such glowing reviews from other people, and their finished-product photos were so exceptional (I was especially in awe of Lladybirds’s and Scruffy Badger Time’s), I decided I just HAD to give it a go.


First off, I just have to say that the drafting of this pattern is exceptional.  I think this is the first pattern I have ever sewn where EVERY SINGLE NOTCH LINED UP!  It was like a miracle.  “No way!  It’s lined up again!  Could it be…a pattern is ALWAYS supposed to do this??”  Now, it could be that I am often a little relaxed with my tracing and cutting, but many times I have had to assume that notches are more an indication of where to join my pattern pieces.  Taking them literally would be unwise, unless I like the fronts of my pants to be half and inch longer than the back, or the front of a shirt to extend half an inch further into the armpit than the back…you get the idea.  Anyway, this DID NOT HAPPEN with the Thurlows.  They were a delight to sew.

I sewed a size 0 based on the project’s final measurements, given on the pattern envelope.  The centre back of the pants has a big extension to make fitting to the waist easier, so I suspect that I was able to get around the not-really-pear-shaped issue by cutting for the hips and fitting the waist as needed.

This project was full of firsts for me- first time sewing woven pants, first time sewing double welt (or ANY kind of welt!) pockets, and the slash pocket technique was also new to me.  I will be ever, eternally grateful to Lauren from Lladybird for her Thurlow Sew-along; I found the Sewaholic instructions for the Thurlows a bit hard to follow, and this first of my adventures into quality-clothes-sewing may not have ended as well without the sew-along instructions and photos.


OH-MY-GOSH! LOOKIT-HER…double welt pockets.

These trousers are made with a grey gabardine.  I wanted them to be stylish as well as practical.  Having worked as a performer a lot of my adult life, I have trended towards flamboyant, brightly-coloured (garish?) outfits, and now I’m not sure I trust myself with colour.  I’m not sure what colours really SUIT me, as opposed to just being attention-drawing.  So, grey was a nice, safe, and hopefully elegant choice.  BUT…

No one needs to know about the INSIDE, do they?

My mother once told me red and orange do not go together, but I luuurve it!

My mother once told me pink and orange do not go together, but I luuurve it!

So, there you have it.  The best pants in my wardrobe.  And I MADE them.  Hurrah!!  AND…I won Sewing Pattern Review’s Pants Contest with these pants.  How exciting is THAT?!?

Tasia from Sewaholic, thank you so much.  You have made me excited to sew!

No money, but pretty lining!

No money, but pretty lining!